Madrix NEBULA

MADRIX NEBULA is a flexible LED pixel tape driver to directly control a wide range of digital LEDs.
Developed and made in Germany.

 

3 versions with different port counts are available:

LUNA 4
LUNA 8
LUNA 16

Specification

The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over an Ethernet network or USB and is built to provide excellent image quality.

New Second Generation:
2 Ethernet Ports and Daisy-Chain Support!

New firmware 2.0: 
Streaming ACN, Start Channel, Channel Order, Output In Case Of Connection Loss, and more!

SPI Converter & Direct Connection
Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

 

Quality Output Of 8 Universes
Each device drives up to 1,360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

 

Art-Net / Streaming ACN / USB
Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition, simply connect to the MADRIX Software over USB.

 

Sync Mode & Daisy-Chain Support
MADRIX Software and hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.

 

Designed For DIN Rails Or Walls
Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.

 

Invaluable Features
The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Supported LEDs
APA101 / APA102 / APA104 / APA106 / GS8207 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S AddressingAs of March 2019. Additional LED types will be supported with future firmware updates.Connectivity

  • 2x OUT (via pluggable screw terminals)
  • 2x RJ45 Ethernet ports
  • 1x USB port
  • 1x Power (via pluggable screw terminal)

Package Contents

  • MADRIX NEBULA
  • Set of screw terminals (2x 4-pin and 1x 2-pin)
  • USB 2.0 cable (certified)
  • 2x Wall-mount brackets
  • Quick start guide / technical manual