8 Pixels 8 individually controllable pixels
Helios Tube
Helios Tube has all the features of the popular Titan Tube while offering a smaller format. It allows mounting in areas where a Titan Tube wouldn’t fit and also increases portability. The Titan Tube mini has 8 pixels and half the brightness of Titan Tube and just over half its length. Colors and brightness are perfectly matched to those of Titan Tube.





Tunable White with range from 1,750K to 20,000K.

Ultra High Color Rendering TLCI ≥96, CRI ≥96, CRI Re≥90 from 3200K to 6500K

Boost Mode Ultra-bright when displaying white color for 2h or while connected to AC

Backside Display Quick access to DMX setup, colors and hue, saturation, intensity control.

Mounting accessories Custom holders, stands etc. allow easy fixation for any production
Astera System
Control Lights
Create complex programs out of colors, effects, and settings. The AX1 Wireless PixelTube will remember and repeat these effects without requiring a constant wireless link.Quickly create groups of lights, assign positions and select which the PixelTube should receive commands.
Monitor lights
Keep a complete overview of the status and all settings of your PixelTube while you operate them. View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual PixelTube or Astera Event Spotlights and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if AX1 PixelTubes are controlled via DMX.
Set-up faster
Set up your PixelTube conveniently out of the distance.
Set DMX address and DMX footprint for one or several PixelTubes or Wireless Event Spotlights; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
LumenRadio
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Compatibility
The AX1 Wireless PixelTube carries the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.

PowerBox
This device has an Powercon True1 input and output and a 5-pin XLR input and output. Furthermore it has an RJ45 port for Art-Net and sACN and converts the signals to DMX.
Up to 10 Titan Tubes can be connected to each PowerBox with a special power+data cable. The maximum cable length is 15m.
The PowerBox is designed to be placed on a floor or hung in a truss. It has a 3/8” thread that can be removed to allow 1/2” clamps to be attached (same as AX5). In addition, it has holes for safety leashes.

Unique Astera Features
Technical specifications
Optical
Colors: Red, Green, Blue, Mint, Amber
Total LED power: 36W
Maximum power draw: 24W
TLCI: ≥96
CRI: ≥96
Luminous flux: 1340Lm
Emittance @1m: 393Lx
Strobe: 0-25Hz
Beam Angle: 120˚
Field Angle: 180˚
Pixels: 8
Electrical
Battery: LG Chem Lithium-ion
Battery Lifetime: 70% after 300 cycles
Battery Runtime: Up to 20 hours
LED Lifetime: 50.000 Hours
Charging time (nominal): 3 Hours
Input Voltage : 24V 1.25A
Control
Backside Display with HSI control
Infrared
Wireless Modules: 865-870MHz | 902-928MHz | 2.4GHz
Range: 300m | 330 Yards
Wired DMX: supported via Astera PowerBox
Wireless DMX: CRMX & others, excluding W-DMX G5, City Theatrical
Construction
Housing: Polycarbonate, metal endcap
IP Rating: IP65
Relative humidity: 0-100%
Operating Temperature: 0-40 ˚C | 32-104 ˚F
Weight: 0.765kg | 1.68Lbs
Dimensions: Ø42 x 550mm | Ø1.6” x H22.7”